-
-
U-BOOT-Damien
... -Boot project (http://sourceforge.net/projects/u-boot)
- current project page: see http://www.denx.de/wiki/U-Boot
Names ... operations in i2c_init()
is completed. This callpoint can be used to unreset i2c bus
using CPU i2c controller register accesses ...
-
DualSPHysicsRecon
... folder XML_examples includes some XML examples of animations that can be seen at www.vimeo.com/dualsphysics:
- CaseFlap_Def.xml ... .ac.uk/sphysics/index.php/SPHYSICS_Home_Page
- Dual SPHysics page: http://ephyslab.uvigo.es/index.php/eng/dual_sphysics/
- ...
-
uboot_devel
... -Boot project (http://sourceforge.net/projects/u-boot)
- current project page: see http://www.denx.de/wiki/U-Boot
Names ... operations in i2c_init()
is completed. This callpoint can be used to unreset i2c bus
using CPU i2c controller register accesses ...
-
ravion-uboot
... project (https://sourceforge.net/projects/u-boot)
- current project page: see https://www.denx.de/wiki/U-Boot
Names ... 0 you can
omit this define.
CONFIG_SYS_I2C_MAX_HOPS
define how many muxes are maximal consecutively connected
on one i2c bus. ...
-
sg3_utils
... site supporting the sg3_utils package can be found at
http://sg.danny.cz/sg/sg3_utils.html . That page has a table of released
... . via
a write() read() sequence) or issue special "commands" (e.g. bus and device
resets) still need to use the Linux sg driver ...
-
u-boot
... project (https://sourceforge.net/projects/u-boot)
- current project page: see https://www.denx.de/wiki/U-Boot
Names ... 0 you can
omit this define.
CONFIG_SYS_I2C_MAX_HOPS
define how many muxes are maximal consecutively connected
on one i2c bus. ...
-
Renux_u-boot
... -Boot project (http://sourceforge.net/projects/u-boot)
- current project page: see http://www.denx.de/wiki/U-Boot
Names ... operations in i2c_init()
is completed. This callpoint can be used to unreset i2c bus
using CPU i2c controller register accesses ...
-
kf_u-boot
... or the end. For instance, such a
layout can have sector sizes of 8, 2x4, 16, Nx32 kB. In
such ... :
If defined, the number of milliseconds to delay between
page writes. The default is zero milliseconds.
- CFG_I2C_EEPROM_ADDR_LEN:
The length ...
-
u-boot-1.1.6
... or the end. For instance, such a
layout can have sector sizes of 8, 2x4, 16, Nx32 kB. In
such ... :
If defined, the number of milliseconds to delay between
page writes. The default is zero milliseconds.
- CFG_I2C_EEPROM_ADDR_LEN:
The length ...
-
u-boot-tekkamanninja
... -Boot project (http://sourceforge.net/projects/u-boot)
- current project page: see http://www.denx.de/wiki/U-Boot
Names ... operations in i2c_init()
is completed. This callpoint can be used to unreset i2c bus
using CPU i2c controller register accesses ...
-
Go To English Version 超过100万源码资源，1000万源码文件免费下载
