-
-
u-boot-darlo
... -Boot project (http://sourceforge.net/projects/u-boot)
- current project page: see http://www.denx.de/wiki/U-Boot
Names ... operations in i2c_init()
is completed. This callpoint can be used to unreset i2c bus
using CPU i2c controller register accesses ...
-
FIREFIREFIRE-Multiboot-PoC
... or the end. For instance, such a
layout can have sector sizes of 8, 2x4, 16, Nx32 kB. In
such ... :
If defined, the number of milliseconds to delay between
page writes. The default is zero milliseconds.
- CFG_I2C_EEPROM_ADDR_LEN:
The length ...
-
U-boot-6410
... -Boot project (http://sourceforge.net/projects/u-boot)
- current project page: see http://www.denx.de/wiki/U-Boot
Names ... operations in i2c_init()
is completed. This callpoint can be used to unreset i2c bus
using CPU i2c controller register accesses ...
-
u-boot-2011.06-for-MINI6410
... -Boot project (http://sourceforge.net/projects/u-boot)
- current project page: see http://www.denx.de/wiki/U-Boot
Names ... operations in i2c_init()
is completed. This callpoint can be used to unreset i2c bus
using CPU i2c controller register accesses ...
-
lpc31xx-uboot
... -Boot project (http://sourceforge.net/projects/u-boot)
- current project page: see http://www.denx.de/wiki/U-Boot
Names ... operations in i2c_init()
is completed. This callpoint can be used to unreset i2c bus
using CPU i2c controller register accesses ...
-
lenovo_a1_07_uboot
... or the end. For instance, such a
layout can have sector sizes of 8, 2x4, 16, Nx32 kB. In
such ... :
If defined, the number of milliseconds to delay between
page writes. The default is zero milliseconds.
- CFG_I2C_EEPROM_ADDR_LEN:
The length ...
-
wiz
... back will produce an open-bus value.
```
snes.ppu.bg_mode = a;
```
Similarly, there can be side-effects that occur ... bank available at address range `0x2000 .. 0x3FFF`. Affects zero page.
- `mpr2 : u8` - mapper register 2, maps the memory bank ...
-
amx_uboot
... -Boot project (http://sourceforge.net/projects/u-boot)
- current project page: see http://www.denx.de/wiki/U-Boot
Names and ...
4th and following
BOOTP requests: delay 0 ... 8 sec
- DHCP Advanced Options:
You can fine tune the DHCP functionality by ...
-
omapzoom_u-boot
... or the end. For instance, such a
layout can have sector sizes of 8, 2x4, 16, Nx32 kB. In
such ... :
If defined, the number of milliseconds to delay between
page writes. The default is zero milliseconds.
- CFG_I2C_EEPROM_ADDR_LEN:
The length ...
-
fgtk
... Filter for screen/tmux/script output to send desktop notification (using sd-bus
lib) when shell prompt is detected on stdin, to enable ... an http link with either checksum on the page
or in the file nearby - you can easily run the thing providing both link ...
-
Go To English Version 超过100万源码资源，1000万源码文件免费下载
