-
-
paparazzi_lisa
... , MA 02111-1307, USA.
Intro
-----
Paparazzi is an attempt to develop a free software Unmanned (Air) Vehicle System.
As of today the ... controller board while it is connected to the PC with
the USB cable.
2) From the Paparazzi center, select the "ap" ...
-
lisa
... , MA 02111-1307, USA.
Intro
-----
Paparazzi is an attempt to develop a free software Unmanned (Air) Vehicle System.
As of today the ... controller board while it is connected to the PC with
the USB cable.
2) From the Paparazzi center, select the "ap" ...
-
loa
... + FPGA
Project Loa
===========
The goal of the project is to develop a powerfull and flexible control board
for robotic (and other) ... than be outsourced to a faster microcontroller
or PC connected via USB or a fast UART bus.
Naming
------
A "Loa" is a ...
-
EvalBotADK
... should work also with any other Stellaris ARM chipset supporting USB OTG with minor changes).
About Hardware Hack:
The EvalBot ... ready to install Android ADK from adk_release_0512.
Later we could develop our own Android Application but for this release i ...
-
open-spectrometer
... -available mechanical designs, electronic plans, and software for a USB spectrophotometer. The end goal is an instrument that ... inexpensive a wooden enclosure.
Beyond hardware, the project will develop embedded firmware, and desktop user software, and an ...
-
tudelftPaparazzi
... , MA 02111-1307, USA.
Intro
-----
Paparazzi is an attempt to develop a free software Unmanned (Air) Vehicle System.
As of today the ... controller board while it is connected to the PC with
the USB cable.
2) From the Paparazzi center, select the "ap" ...
-
cox
... sensors LCD1602 and so on
- Protocol Stack based on CoX, such as USB stack and so on
- The code ported from all manufacturers library to ... :
1. Port Cox to a new MCU
2. Improve CoX
3. Develop drivers based on CoX
Please see the guide in the /Document/.
...
-
callback-blackberry
... $ ant load-simulator
To build your project and load it onto a USB-attached device:
$ ant load-device
Updating the PhoneGap Framework
-------------------------------
As you develop your application, there may be updates ...
-
shf3
... location or a new machine or an encrypted external drive (eg. USB or flash drive). All your SSH keys, GSI certificates and any ... yet follows this scheme. It is a good starting point to develop new wrappers. The application wrapper does not depend on the ...
-
keysync
... and your desktop apps, plug in your phone or device
via USB and run the sync. Or you can manually copy the ` ... you want to install the dependencies because you're going to develop
KeySync, then install them manually with:
sudo apt-get install python- ...
-
Go To English Version 超过100万源码资源，1000万源码文件免费下载
