AVR-RGBTumbler - 源码 - 源码 - 免费下载

AVR-RGBTumbler

文件大小： unknow

源码售价： 5 个金币积分规则积分充值

资源说明：Accelerometer controlled RGB LED using an AVR ATmega MCU.

# RGB Tumbler readme

This is the firmware source code for the RGB Tumbler project. Read more about the project (including schematics and board layouts) here: [http://atomslagstyrken.dk/arduino/tag/rgbtumbler/](http://atomslagstyrken.dk/arduino/tag/rgbtumbler/).

## Compilation

If you are using a Mac with Xcode you can open the PWM.xcodeproj project and select either "build", "flash" or "fuse" from the targets dropdown and then choose Product -> Build.

As the names indicate, "build" will just compile the project (handy for verifying the syntax), "flash" will compile and flash to the device and "fuse" will set the devices fuses as specified in the Makefile.

If you are _not_ using a Mac with Xcode, just use the normal AVR Libc build commands: `make flash` or `make fuse`.

## Configuration

Edit the Makefile to specify programmer and port. I am using an AVRISP mkII on the USB port.

# Disclaimer

Use at your own risk. And the code is most likely not complete yet...

部分文件列表（点击文件名可查看文件内容）

					
									本源码包内暂不包含可直接显示的源代码文件，请下载源码包。