-
-
lpc1343fzr
Sobre
=====
Schematics of an NXP LPC1343 breakout board.
Licença
-------
lpc1343fzr by Andre Aureliano
-
Root2-Robotathon-Demo
Project to test all functions needed for Robot-a-thon
# LPC1343 Code Base
This software library is based on the freely available LPC1343 Reference
Design available at www.microBuilder.eu. It's licensed under the BSD
license (see ...
-
firmdevtools
... structs, and so on as desired. In the case of the LPC1343, the resulting include file is nearly 8 times the size of ... to get usage and a list of supported parts.
##lpcprog
The LPC1343 microcontroller has a ROM bootloader that emulates a USB mass storage ...
-
LPC1343ReferenceDesign_v1.6
microBuilder's LPC1343 devboard with HC49/S crystal
This is a version of microBuilder.eu LPC1343 Reference Board [1],
slightly modified:
- the ocillator footprint is replaced with a HC49/S, these crystals
are available locally and cheaper;
- spacings ...
-
USBug
LPC11U1x/LPC1343 Cortex M0/M3 Microcontroller Breakout Board
USBug Development Board
=====
The USBug is a complete USB-based microcontroller development system in a very small footprint.
All programming is done via the USB port. No special programmer is ...
-
swddude
... are known to work:
* LPCxpresso LPC1114.
* LPCxpresso LPC11C24.
* LPCxpresso LPC1343.
Note that the LPCxpresso boards will only work ... things -- there is no
safety net.
* On the LPC1343 specifically, the SWD interfaces sometimes gets "stuck" and ...
-
pentarm13xx
# Pentarm13xx
small dev-board using an NXP LPC1343
* 72Mhz Cortex-M3 Core
* 32kb flash
* 8kb RAM
* USB (CDC,MSC,HID)
* UART
* SPI
* I2C
* 3 16Bit PWM pins
* 4 32Bit PWM pins
* 3 ADC pins
* 18 GPIO pins
* Powered from USB, 5V or 3.3V supply
* 2 LEDs
* ...
-
CatNip
LPC1343 Developement board
CatNip - LPC1343 Developement board
======
This is a derivative work of microbuilderÕs LPC1343 Reference Design http://www.microbuilder.eu/projects/LPC1343ReferenceDesign/
The design is aimed at creating a platform that ...
-
bobc_hardware
... to Due is lost while 12V power is applied.
Control Panel
--------------
A Control Panel for RepRap printers, based on Makerbot Control Panel.
MicropendousX-1343
-------------------
A Mini CPU Module for NXP LPC1343 based on MicropendousX-1343.
-
measure_pulse_width_async
... and timers.
This code is from another project I worked on (https://github.com/PSU-AVT). It
is meant for an lpc1343 chip compiled using codered and the microbuilder.eu
code.
It was originally designed to measure a pulse width from a Maxbotixs MB1040
...
-
Go To English Version 超过100万源码资源，1000万源码文件免费下载
