English
资源说明：build monitor that will trigger lights via x10
# buildlights
This little ruby gem will check a hudson rss feed for build failures and
turn a x10 lamp module on if any failures are found. The simplest way
to use it is to find the crapiest computer you can find to use as a
controller that has a serial port, a network connection and runs ruby. When build failures are found it will turn on A1 and
turn off A2 and vice versa for when no failures are found. Don't worry
if you don't know what that means because the default is A1 on all the
x10 stuff so just buy the [kit](http://www.x10.com/automation/ck18a_s_ps32.html) and plug the firecracker into the serial port and a light in to the tranceiver.
## Requirements
- linux (ubuntu assumed)
- ruby
- [bottlerocket](http://www.linuxha.com/bottlerocket/)
- [some x10 stuff](http://www.x10.com/products/firecracker.htm)
## Usage
sudo apt-get install bottlerocket
sudo gem install buildlights
Add the following to cron
buildlights -v --hudson http://yourhudsonserver/rssLatest
**WTF?** that didn't work
Ok, it was that easy at the last gig. The current gig wasn't that easy.
For some reason it didn't recognize the serial port so here's what I
did...
* sudo mv /usr/bin/br /usr/bin/br-original
* sudo gedit /usr/bin/br
\#!/bin/sh
/usr/bin/br-original --port /dev/ttys0 &@
Your situation might require to check more than once per minute that
cron provides, here's a sample script that I've used to do that...
#!/bin/bash
GEM_BIN=/var/lib/gems/1.8/bin
RSS_FEED=[the feed url]
CHECKS_PER_MINUTE=6
SLEEP_SECONDS=$((60/$CHECKS_PER_MINUTE))
for((i=1; i<$CHECKS_PER_MINUTE; i++)) do
$GEM_BIN/buildlights -v --hudson $RSS_FEED &
sleep $SLEEP_SECONDS
done
## Copyright
Copyright (c) 2011 Darrin Holst. See LICENSE for details.
本源码包内暂不包含可直接显示的源代码文件，请下载源码包。
