-
-
exp_1.zip
For round-off error and numerical stability
-
single4.rar
Transient stability analysis of SMIB in matlab/simulink
-
pgpi.zip
PGPI(NUM,DEN,W,FI,A) plots the stability boundary locus L(KP,KI,W)in the (KP,KI)-plane for an LTI system with transfer function defined by its NUM, DEN coefficients and driven by a PI controller with transfer function, C(s)=kp+(ki/s). Frequency (W) ...
-
Wind-Turbine.rar
... recover to normal operation
immediately after a temporary disturbance. This paper studies
the effect of power electronic system on stability improvement of
a wind turbine system. The functions of the STATCOM and
DVR in improving the system stability ...
-
CHAPTER-4.zip
... -tolerant control (FTC) system is a control system that can accommodate system component faults and is able to maintain stability and acceptable degree of performance not only when the system is fault-free but also when there are component malfunction.
-
mpc.zip
... -tolerant control (FTC) system is a control system that can accommodate system component faults and is able to maintain stability and acceptable degree of performance not only when the system is fault-free but also when there are component malfunction.
-
example.rar
... Various circle equations
gain Constant gain circles
noise Constant noise circles
quality Constant Qn circles
stability Stability circles
conversion Conversion routines between different twoport
network representations
global Some useful routines ...
-
Ziegler_Nichols.rar
... are probably the most commonly used controller structures in industry. They do,
however, present some challenges to control and instrumentation engineers in the aspect of tuning of
the gains required for stability and good transient performance.
-
Bases_regulateur_PID(3).rar
The proportional term in the controller generally helps in establishing system stability and improving
the transient response while the derivative term is often used when it is necessary to improve the
closed loop response speed even further.
-
-